Round Bowl Vibratory Machines

ROUND BOWL VIBRATORY MACHINES

“Vibratory Deburring” is also referred to by its original engineering term: “Mass Mechanical Surface Finishing.” But what is it, and how do you get started?

Mass Mechanical Surface Finishing is the term for processing bulk quantities of parts simultaneously to generate a safe edge, radius or a specific RA or RMS surface profile.

Let us explore some of the more standard machines and methods.


Contact Us for Your Round Bowl Vibratory Machine

WE SELL THE SYSTEM, INCLUDING ROUND BOWL VIBRATORy MACHINES

From running single parts, batch processes or continuous system setups for automatic production, versatility is here. Take advantage of internal separation of parts and media (media falls through screen openings and parts exit machines) and continuous setup for once-around-and-out applications where the part(s) need to be washed or Rust Preventative applied.

The Round Bowl can be set up with timers to automatically unload/separate while no operator is present.

Kinetic energy is the driver for the action or motion in the bowl, with roll and progression. This is from the machine vibratory assembly (motor, shaft and bearings). The round bowl splits the energy two ways: roll and progression. This is all adjustable depending on the process and results required.

               

Patented bowl design. Unique media flow action, natural contour and complete immersion of parts in media mass.

No matter the style of vibratory deburring equipment, the more you see the parts, the less work is being done. Burr removal is critically important because it directly affects the performance and reliability of the parts.

Round bowl units run a more gentle process for a finer surface profile and can eliminate scratches due to part on part contact like in the tub style.

The rotation of mass is set up through the aggression of the process. Progression is used for gentler processes and needed for good internal separation. We recommend using a sample part processing to find the right rotation. There are many variables with tumbling media, part sizing and screening.

Questions? Get In Touch!

 

Styles of Round Bowl Vibratory Deburring Machines

HIGH-ENERGY ROUND BOWLS FOR FASTER TIME CYCLES AND UNLOADING ADVANTAGES

Almco offers a High-Energy (HE) Bowl Series featuring shorter cycle times and increased action when production dictates. “HE” Series bowls have design efficiencies and multiple advantages:

  • High-impact vibration with increased amplitude control of both upper and lower counterweights
  • Two-dimensional control of both impact stroke and mass progression
  • New concept “Mass Roll” with strategic parts positioning
  • Parts/media unloading efficiency via high-energy mass rotation and action
  • Steel media parts processing and unloading capability

SBB Spiral Bottom Vibratory Finishing Bowl

  • Helical-bottom designed processing tub
  • 8, 12 and 24 cu. ft. capacities
  • Extended separation deck
  • Plastic, ceramic and steel media process capable

LONG RADIUS BOWL VIBRATORY FINISHING MACHINE

  • Choose Continuous or Once-Around-And-Out parts flow
  • Reduced cross-section channel size for quick 200% unloading with no assistance
  • Complete machine with all features
  • Stackable for multiple processes running from one machine to another automatically
  • Critical parts and tight tolerances
  • No part-on-part contact
  • We have you covered with an individualized compartment divider assembly.

The OR- is one of the most versatile round bowl vibratory machines on the market, featuring a formidable combination of batch processing, internal separation and a removable center dome for larger parts and divider assemblies. All of these features make it a reliable and efficient system part of one great machine/system.

OR10 DividersRound Bowl Deburring System

 

 

Bearing Hub Type

Rotating Divider Assembly

 

 

 

Contact Advanced Deburring & Finishing’s expert team today!
Contact Us Give Us A Call

Call Now Button